17 June 2017

Another development


Now you can see here what I did with that weird squiggly wiggly thing from yesterday. I wove it in between the petals of the inner flower bringing it up to join it to the picots on the chains of the last round. 

I used a lock chain to do this with.

Am I happy with it now? Well, the answer is a big, big NO.  Back to BC3 for further instructions.  I'll keep you posted.

Top picture is the 'front' and the bottom one - well, I'll leave you to guess!!!  NO, not the side view!!

16 June 2017

Now what?


After the excitement of yesterday and my announcement that Heidi now has the book (Dora Young's "All New Knotless Tatting") in her hands I am now 'back to boring' you with my regular posts.  

Yes, I'm still working on the ring 'thing'.  I've had an idea but not sure if it'll work.  This is actually part of it.  


I think it looks like a doomed idea but you never know.  

I'm continuing with the Dora motif I showed you yesterday, too.  I have to have two projects 'on the go' at the same time!!!

15 June 2017

GOOD NEWS

Just heard a few minutes ago (when I woke up!) that the Dora Young reprint is now available. 

Heidi sent me this link so you can buy directly from her but she's also sent copies to Handy Hands too although they won't be there for another week or two - depending on the USA mail, I suppose!!!

Funnily I'd just started a new adventure with one of the patterns yesterday as I've been dying to see how it would look in two colours. I may have to start again, though, as I think I've made the picots a bit too big on this.

The reason I started was because I heard a week ago that the book was at the printers and that Heidi would be sending me a copy.  I'll tell you ALL about it when it arrives.  The excitement is intense in my corner of Tat Land and I'll be keeping a close eye open for the postman!!!

14 June 2017

Another idea - sort of!


This time I added beads to the chains.  This is an OK sort of idea but it isn't really original at all.  

I'm not happy as I want something more from BC3. Not sure how to progress this but I'm sure it won't stay like this!!!

It's years since I last played with covering cabone rings with tatting and I've done other projects since but I don't think this is end of this year's playtime, I promise!!  

There's something addictive to covering rings with tatting and I find it mesmerising.  I'm easily pleased!!!!


13 June 2017

Next part of my story about a ring!


Can you see what I've done with the ¾" ring? 

First I made a motif which fits snugly into the middle of the ring. I added beads to the bottoms of each ring by having them on the thread round the back of my hand when I started each petal. Also, with the canny use of vsp's, I managed to make those darn rings sit sweetly where they should. 

I sometimes think that the folks in Tat Land should christen me the 'Queen of the VSP's' as I use them such a lot!!!!  Mind, they'd have to crown me with a vsc (very small crown)!!!  There again - perhaps nobody's noticed!!!! They are an important design stability element for me. Well, that's my excuse and I'm sticking to it so don't you all throw rotten eggs at me!

The next thing I did was to cover the ring at the same time as adding the flower to the tatting.  

More to come!!!

12 June 2017

Pattern now ready


I thought you might like to see all the beaded baubles together in one place. Well if you didn't want to see them you're going to anyway cause they're here!!! I believe in making my blog readers suffer!

Oh, the pattern - nearly forgot. It's here. 


10 June 2017

Rings and things

Here is a ring.

That's all I'm saying - it's a ring!!! 

A metal one from the necklace with the oversized beads (now my new Christmas decorations).

I think this is going to be my next  project!!  This size of ring (¾" internal diameter) seems to be pretty standard as I've 'acquired' lots over the years.  

All I've got to do now is pull out BC3 and get him working again.  Just when he thought he was going to have a rest!!!


9 June 2017

Finally!

The very, very last one!!!

This time I've used white again but this time with green beads. 

Now to find something new to do. Not sure what I'm going to tackle next but I do know it'll be fun!!!!


7 June 2017

The penultimate bead dangle

Now a change of colour again. This is number 7 of the 8 beads that I have of this size. 

White is just lovely and I've chosen gold beads and clear Swarovski crystals for this one. 

I've not had time to do anymore to the pattern for a few days but am hoping to get it done soon. It will include patterns to fit four sizes of beads. Originally I hadn't intended to publish the details as I thought it wouldn't be of any interest. BUT I've had a few comments where people have asked for details so it will get done!!!


6 June 2017

Sticking with the green!!

I've also managed to start putting the pattern together so it could well be available for all the different sizes of beads after next weekend. Well if that's if I'm not distracted by other things which are beginning to tempt BC3!!!

Today it's still the green thread but with red beads!!!!

5 June 2017

Christmas is coming

And the goos is getting fat. Please put a penny in the old man's hat!!!!

How very stupid to be talking about the 'festive season' when we're not even halfway to the next one. 

I've decided that this year I may actually put these covered beads up as decorations. I never ever get round to putting tatting up anywhere at Christmas. I think we're just two grumpy old gits who can never really be bothered!!! However when I've done all 8 of them they may make a nice decoration. Well, that's the plan at the moment!!!

Here is another one - green thread with green and gold beads.


3 June 2017

I've got a BIG, BIG

SECRET. 

Shall I tell you or shall I keep you in suspense? 

AWWWWW, well I'll tell you as long as you DO NOT tell anybody else.  Remember this is a secret.

The Dora Young re-print is at the printer's RIGHT NOW.  I'll give you further information on how you can get it when I hear back from Heidi.  

1 June 2017

Now in green!!!


I used same thread as yesterday (mainly because I was too lazy to go and get anything else) but this time I found some green beads.

I forgot to tell you that I had to slightly adjust my stitch count using this thread but it wasn't a problem as it was only on the last row.

I am writing the pattern down as I go but I've got visitors at the moment so tatting has almost stopped!!!!

30 May 2017

Another but different

There's just one thread that I really, really love that isn't cotton based. That's the Altin Basak gold (silver and bronze too) metallic. I THINK it's called Nakis Simi but I've long since lost the label!!! I can just tell you that it was stonking good value for money as I've had it for years and years and used it a great deal. It comes in a small cone.

Anyway, that was my next 'target' for the very large beads and you can see it below. Do I love sparkle? YES I DO!!!

Also shown is one of the beads I'm using too.



29 May 2017

Double trouble?


This time I've doubled up on the dingly dangly bits and added beads to the chains on two consecutive rows. 

I'm not sure if anybody would want the pattern/patterns for this but I will put it together eventually unless I go off on another idea which often happens!!! 

Although it's really really simple with just a few split rings (Diane!!!) it is a bit fiddly for the last few rings and chains as you have to work with the bead inside the tatting. Well worth it, I think.


27 May 2017

Eureka or not

Not sure if this is what I'm going to finally settle on!

This was VERY hard to photograph as it sparkles SO much. On the long beaded picots there are some red sparkly bicone beads which are the 'jam' in a sandwich of size 11 sparkly red beads. 

I have an idea for another one so hold tight and be prepared for more!! Don't worry - you won't get bored as I've only got 7 of the big beads and am trying to resist the temptation of starting on the rings. Ideas are buzzing and BC3 is nagging!!!

26 May 2017

Another new start

Remember these beads I've been working with? Well there are three sizes and as we all know - size is critical. Well, almost as tatting does have a bit of 'give' to it.

A neighbour and I went on a 'jolly' to Birmingham a few weeks ago and I mentioned I'd be looking out for more beads in the same sizes. Nothing, zilch, nowt in the market or anywhere else. 

Then Sue happened to be in a nearby town a week or so later and found a necklace with beads and rings which she bought for me from a charity shop. 

The beads turned out to be quite a lot bigger than the ones I'd been playing with so it's back to the 'drawing board' - as 'they' say!!!

Here's a 'pattern' for the beads. I know, it's not very glamorous as it's a test to see if my guess work design fits or not! I'd say it was a good, snug fit! Now to write it down properly and use some 'decent' thread to see what comes of it. I'm thinking Christmas decorations but BC3 may have other ideas!

25 May 2017

Found and in need

Found and in need of a new and good home!!!!

As you've probably gathered I've not had a lot of time for tatting or showing you 'stuff' but while doing what I've been doing in the background (MASSIVE clean and tidy) I found this Bocote Pop A Bobbin Shuttle lurking on my worktop by the computer. 

This sad and lonely (and only child) is for sale for $33.69 or £20.00 plus postage. The postage overseas will be roughly £3.15 depending on where in the world the buyer is.

Please email me if you want to give this little guy a good home.  All he needs to keep him happy is lots of thread and (occasionally) a few beads!!!


23 May 2017

Now for a better picture!

Not only that but another finished project. This is the t-shirt that I threatened with a tatted edging. It's amazing how different a cheap t-shirt can look with a very simple tatted edging. 

At least this picture does the colour of the garment justice!!!  I know somebody called Diane who will like the colour!!!

22 May 2017

Another necklace finished.

I'm really liking playing with the beads so decided to make another necklace which I'll probably never wear. 

Like the last one I've smothered it with Scotchgard but unlike the last one I've added tiny gold beads to the joining picots. 

19 May 2017

Not a lot going on

The rest of my life is gradually impinging on my life in Tat Land so I've not got a lot to show and may have little over the next two weeks either.

I have been doing a trim for another new t-shirt and you can see in this picture the rather crumpled item! At the moment I am pinning it on and it needs to be sewn. This is a really bad picture as it was getting dark when I took it. The shirt is actually a very pretty blue. Perhaps I'll get a better photo when it's finished. 

I intend to do the same trimming for the sleeves too.

17 May 2017

Another task finished

I managed to put the beads together yesterday and this is the resulting necklace. I'm pleased with it although it took some re-working to get the chain parts the right lengths to suit my scraggy turkey neck.

I quite enjoy working with two pairs of pliers and a split ring opening tool thingie. 

When it was all done I gave it a good 'dose' of fabric protector spray stuff. I think mine is Scotchgard and I've had it for many, many years. This gives any jewellery protection from your body oils - well, that's what I tell myself!!!!

Unfortunately the pattern won't be available for a while as I've been given more beads by a neighbour.  These are a lot bigger than the three sizes I've used on this project so I'm going to have to do a bigger pattern for them.  I doubt they will be suitable to wear as jewellery but I really, really think they're going to become fantastic Christmas decorations.  

16 May 2017

Thank you

A VERY BIG thank you to Renulek for her 2017 doily. I've really enjoyed the adventure and have (even after all these years) found I have learned something through making it!!!

The way Renulek presents her doilies is very different to the way I do. That's NOT a bad thing as I'm sure my way of 'doing things' isn't perfect by any means. It's just a different way. I've really enjoyed this as it does leave the tatter to work things out for themselves which has really perked up BC3. I just hope that Renulek does another next year as I reckon I'll take part.

Also a big thanks must go out to Jill who sent me a multitude of fine threads which caused me to start the doily to experiment with them and Sally who said 'why don't you do HWT'?  My doily measures 18½" from point to opposite point.  It may be good to compare with other doilies shuttle tatted in size 20 thread.

The final row was made with the rings being two shades of blue and the chains with blue and black threads.  It sort of 'contains' the whole thing, I think.

I am NOT a doily person and have none out around the house. In fact they usually go into one of the tatting boxes and get forgotten about!!! Sadly that's what will happen to this one as it's always the making that fascinates me - not the finished item!!!

15 May 2017

Tatted beads


I don't quite know what happened a few days ago but I clicked on a link which took me here

Having found the big beads the other day I decided that this was going to be my next crochet project but with the beads that I blogged the other day in the middle and probably a lot smaller. Only trouble was I was thinking in a 'lazy' mode and decided that it was too much trouble to go and find a crochet hook for a size 20 thread which I'd got lurking in a container nearby.

Having gone through all this thought about the crochet balls I then decided 'why not tat them'? Where to find a pattern was the next problem as I'd got 3 sizes of beads to cover. No idea so I sent an email to BC3 who was 'up for the challenge'!!!

Not happy with the blue one but the variegated rainbow one worked well.  Off to sort out the stitch count (or whatever) for the other sizes.


13 May 2017

Whatever next?


What am I going to do with these? 

Three sizes and I've got a few of each. I've had them for years and years and they've been sitting in my cupboard staring at me from time to time. 

They've emerged from their space but I've tied them together to stop the little stinkers from escaping!!!!   They did their best to get away from me and I'm still searching under the furniture for at least one that I've still not found.  I wonder if it's with the missing crochet hook?

Watch this space to see if anything happens to them!!!!


12 May 2017

A story of a t-shirt!


I bought a t-shirt!!! 

Some people buy dresses but I'm not a dress sort of person!!! I prefer casual or even below casual!!!! 

I bought a couple of t-shirts recently in a cheap shop in town. I like them lots but they're very plain - just like me. Plain Jane!!!! 

So, what does a tatter do with a plain piece of clothing? Well, of course, they yank out some shuttles and attack it with thread. 

I've done a simple split ring braid which I've sewn slightly inwards of the edge. As the t-shirt was cheap I didn't want to spend too much time adding to it as it may well go skanky after a few washes. Mean is what I am!!!  

The true colour is shown in the third picture.  Well, roughly!



10 May 2017

More snowflakes


Just keeping busy, really!!! Well, least it means I'm not getting into any sort of trouble or mischief I suppose!!!

9 May 2017

Round 12 of Renulek's doily.


I finished this round at the weekend but have just found time to blog it!!

I did change the round slightly as when I looked at Renulek's picture I noticed that the three rings joining into the one picot were overlapping in places. Being as that would bother me I thought I'd try another way of tatting that part.

I do feel guilty about changing patterns as I really appreciate the time that it takes to do a design and I don't want ANYBODY to think I'm criticising the pattern as I'm certainly not doing that - it's fine as it is. I'm basically just being 'me' - a fussy old git!!!!

I made notes for myself in case I want to do this doily again. My remembering is very broke lately!!!


8 May 2017

Celebrating

Nah, not my birthday or anything in particular. 

Well, I suppose it is a 'particular' in a way as a birth was made on this date in 2006. Sheeesh, that's eleven years ago!!! 

It's the day this blog was 'born'. Here's my first post and I'm still asking the same question although I THINK I've now got the answer!!!

It simply keeps me motivated!! Tat's all, really!

Sometimes I wonder how many read the blog but then I realise that it's probably a way of dealing with sleep problems as it probably sends my readers to sleep.  Reading it would certainly put me to sleep!!!!  

Now each post ought to have a picture so here's one to brighten the the anniversary day!!!

6 May 2017

Round 11 Renulek


Round 11 done and I THINK I've caught up!!!  Well I have, nearly as I've started on round 12 too.

I was a late starter which isn't surprising as I've only got three brain cells (BC1, BC2 and, of course, BC3). This round I decided needed to be a bit 'pinkish'!!!! 

I'm really struggling now with the colours to use. I'd like to finish with a strong blue colour on the last round. Least that's what I'm thinking now but we'll have to see what happens when I get into the wonderful box of very fine threads. It's such fun blending your own colours and I love the subtle changes I get too.

5 May 2017

Joining down picots


Well I did get the page done in the end. Where does time go? 


A page on how to join the down picot.

4 May 2017

More about the Clover shuttles

A few days ago I had Tatlyn's blog post appear on my blog roll and started to read what she had to say here. 

After a while I thought I was reading my own blog post back here!!!! I carried on reading when I realised that I'd found a soulmate over the Clover shuttles!!! 

As you know I did add more to my original post a few days later and that can be found here. Well I'm going to add more today as time and using these shuttles has caused BC3 to find more things out about them! 

It occurred to me when I was working with sewing threads (HWT) a few days ago that I wasn't having any problems with the threads occasionally 'catching' on 'nubs' of plastic as I normally do with the Aero/Aerlit shuttles. These 'nubs' are often found on the bobbins. Looking again at the bobbins - the Clover ones are more substantial in feel and very smooth - just like the shuttle itself.

I'm a 'bobbin with a hook' kind of girl and the most 'off putting' thing about the  post Clover was not having a hook but I've quickly adjusted to that and find joining with the lovely fine pick just as easy although trying to join to very small picots still needs a fine 0.4mm crochet hook!

Just read a comment from Kathy on my blog post of the other day and I love her idea of 'rolling' the shuttle to wind or re-wind the bobbin.  Here's her comment
"I never remove the bobbin from the shuttle! I merely tie a slipknot around the bobbin (I use the shuttle itself to do this), and wind the thread onto the bobbin by rolling the bobbin (still inside the shuttle) on a soft but not smooth surface, like the opposite side of a mouse pad (which gives it traction). I also retract my thread when tatting by also rolling the bobbin on the mouse pad. It means that I have to have the mouse pad close by when tatting. At home I always have my tatting box on my lap, and the pad is on top of the box, giving the pad a hard surface to sit on. Rolling the bobbin has helped me prevent carpal tunnel!"


3 May 2017

Naming and shaming


When is a core thread NOT a core thread and what is one anyway?

This is a question that I keep asking myself. There's an easy answer when making a chain as the core thread is simply easy to see!!!
I've always wondered what the answer is when it comes to a ring, though. Or a split ring for that matter. What SHOULD we call that core thread which really is also the 'working' thread too? 

This only came to light when I started on another technique page following on from yesterday's which will be about joining drop picots. In the end I resorted to a slightly long winded way of describing it which I will get finished and on my site tomorrow or the next day - with a bit of luck and the wind blowing in the right direction!!!!

2 May 2017

The down picot


The down (and out?) picot is such a useful thing. I've used various ways of doing this picot over the years and find it especially useful for animals - mainly for placing their eyes.

Many moons ago I used to use a PC but gave up and moved over to a Mac some 8 - 10 years ago. Whilst on a PC I used a software package for drawing which I got on with reasonably well but it wasn't going to be compatible with a Mac as for some reason the company didn't do a version for IOS. So, that meant a whole new learning curve. Not only on how to use an iMac but also on how to use the drawing package I eventually bought. I downloaded several pieces of software which allowed me to use them on trial for a while. I finally decided on EazyDraw and have had NO regrets on either changes. Now, why am I telling you this? Simply because a few of my pages still have the drawings on that I did in the PC package and I'm slowly replacing them with ones done with EazyDraw. 

Last week sometime I was talking to a tatting friend about the down picot so went to look at my page and realised it needed updating. So, here it is.




1 May 2017

This was fast!


Compared to the last round this one was like an express train!!!!

I forgot to mention before that the two (or, rather, four) colours I used on the last round were a green variegated and a plain green (for the rings) and a deep purple and black for the chains. It gave such a strong look that this time I thought I'd better break things up with something a bit 'milder'!!!

No idea what I'm going to use for the next round (11) but I'm sure it will also be a quick round to work up. Keep watching this space!!!

Creative Commons Licence

Happy Beaks

Happy Beaks
I beg your pardon? I didn't quite catch what you said.